RouterBoard默认配置

RouterBoard路由器出厂默认配置

#| RouterMode:
#|  * WAN port is protected by firewall and enabled DHCP client
#|  * Ethernet interfaces (except WAN port ether1) are part of LAN bridge
#| LAN Configuration:
#|     IP address 192.168.88.1/24 is set on bridge (LAN port)
#|     DHCP Server: enabled;
#| WAN (gateway) Configuration:
#|     gateway:  ether1 ;
#|     ip4 firewall:  enabled;
#|     NAT:   enabled;
#|     DHCP Client: enabled;
#|     DNS: enabled;

:global defconfMode;
:log info Starting_defconf_script_;
#-------------------------------------------------------------------------------
# Apply configuration.
# these commands are executed after installation or configuration reset
#-------------------------------------------------------------------------------
:if ($action = "apply") do={
# wait for interfaces
:local count 0; 
:while ([/interface ethernet find] = "") do={ 
:if ($count = 30) do={
:log warning "DefConf: Unable to find ethernet interfaces";
/quit;
}
:delay 1s; :set count ($count +1); 
};

 /interface list add name=WAN comment="defconf"
 /interface list add name=LAN comment="defconf"
 /interface bridge
   add name=bridge disabled=no auto-mac=yes protocol-mode=rstp comment=defconf;
 :local bMACIsSet 0;
 :foreach k in=[/interface find where !(slave=yes  || name="ether1" || name~"bridge")] do={
   :local tmpPortName [/interface get $k name];
   :log info "port: $tmpPortName"
   :if ($bMACIsSet = 0) do={
     :if ([/interface get $k type] = "ether") do={
       /interface bridge set "bridge" auto-mac=no admin-mac=[/interface ethernet get $tmpPortName mac-address];
       :set bMACIsSet 1;
     }
   }
   /interface bridge port
     add bridge=bridge interface=$tmpPortName comment=defconf;
 }
   /ip pool add name="default-dhcp" ranges=192.168.88.10-192.168.88.254;
   /ip dhcp-server
     add name=defconf address-pool="default-dhcp" interface=bridge lease-time=10m disabled=no;
   /ip dhcp-server network
     add address=192.168.88.0/24 gateway=192.168.88.1 comment="defconf";
  /ip address add address=192.168.88.1/24 interface=bridge comment="defconf";
   /ip dhcp-client add interface=ether1 disabled=no comment="defconf";
 /interface list member add list=LAN interface=bridge comment="defconf"
 /interface list member add list=WAN interface=ether1 comment="defconf"
 /ip firewall nat add chain=srcnat out-interface-list=WAN ipsec-policy=out,none action=masquerade comment="defconf: masquerade"
 /ip firewall {
   filter add chain=input action=accept connection-state=established,related,untracked comment="defconf: accept established,related,untracked"
   filter add chain=input action=drop connection-state=invalid comment="defconf: drop invalid"
   filter add chain=input action=accept protocol=icmp comment="defconf: accept ICMP"
   filter add chain=input action=drop in-interface-list=!LAN comment="defconf: drop all not coming from LAN"
   filter add chain=forward action=accept ipsec-policy=in,ipsec comment="defconf: accept in ipsec policy"
   filter add chain=forward action=accept ipsec-policy=out,ipsec comment="defconf: accept out ipsec policy"
   filter add chain=forward action=fasttrack-connection connection-state=established,related comment="defconf: fasttrack"
   filter add chain=forward action=accept connection-state=established,related,untracked comment="defconf: accept established,related, untracked"
   filter add chain=forward action=drop connection-state=invalid comment="defconf: drop invalid"
   filter add chain=forward action=drop connection-state=new connection-nat-state=!dstnat in-interface-list=WAN comment="defconf: drop all from WAN not DSTNATed"
 }
   /ip neighbor discovery-settings set discover-interface-list=LAN
   /tool mac-server set allowed-interface-list=LAN
   /tool mac-server mac-winbox set allowed-interface-list=LAN
 /ip dns {
     set allow-remote-requests=yes
     static add name=router.lan address=192.168.88.1
 }

}
#-------------------------------------------------------------------------------
# Revert configuration.
# these commands are executed if user requests to remove default configuration
#-------------------------------------------------------------------------------
:if ($action = "revert") do={
/user set admin password=""
 /system routerboard mode-button set enabled=no
 /system routerboard mode-button set on-event=""
 /system script remove [find comment~"defconf"]
 /ip firewall filter remove [find comment~"defconf"]
 /ip firewall nat remove [find comment~"defconf"]
 /interface list member remove [find comment~"defconf"]
 /interface detect-internet set detect-interface-list=none
 /interface detect-internet set lan-interface-list=none
 /interface detect-internet set wan-interface-list=none
 /interface detect-internet set internet-interface-list=none
 /interface list remove [find comment~"defconf"]
 /tool mac-server set allowed-interface-list=all
 /tool mac-server mac-winbox set allowed-interface-list=all
 /ip neighbor discovery-settings set discover-interface-list=!dynamic
   :local o [/ip dhcp-server network find comment="defconf"]
   :if ([:len $o] != 0) do={ /ip dhcp-server network remove $o }
   :local o [/ip dhcp-server find name="defconf" !disabled]
   :if ([:len $o] != 0) do={ /ip dhcp-server remove $o }
   /ip pool {
     :local o [find name="default-dhcp" ranges=192.168.88.10-192.168.88.254]
     :if ([:len $o] != 0) do={ remove $o }
   }
   :local o [/ip dhcp-client find comment="defconf"]
   :if ([:len $o] != 0) do={ /ip dhcp-client remove $o }
 /ip dns {
   set allow-remote-requests=no
   :local o [static find name=router.lan address=192.168.88.1]
   :if ([:len $o] != 0) do={ static remove $o }
 }
 /ip address {
   :local o [find comment="defconf"]
   :if ([:len $o] != 0) do={ remove $o }
 }
 :foreach iface in=[/interface ethernet find] do={
   /interface ethernet set $iface name=[get $iface default-name]
 }
 /interface bridge port remove [find comment="defconf"]
 /interface bridge remove [find comment="defconf"]
}
:log info Defconf_script_finished;
:set defconfMode;